[:en]
Découpe de l’aluminium
This is enough for all work in wood or plastic.For light metals such as aluminum, of course you can not geth a accurate of 2/100th mm like professional CNC.
Actually what needs makers are very simple, in general, they no need very precise adjustment in buildings, for example aluminum plates of a CNC Formosa can be cut to other CNC Formosa because the part requiring the most accurate for the CNC move smoothie and without backlash is doing by adjustable eccentric.
If you have something to create, you can adapt your design to each parts does not require accurate more than 0.1mm and you same hight costs of a pro machinist.
2 Commentaires
Découpe de l’aluminium
This is enough for all work in wood or plastic.For light metals such as aluminum, of course you can not geth a accurate of 2/100th mm like professional CNC.
Actually what needs makers are very simple, in general, they no need very precise adjustment in buildings, for example aluminum plates of a CNC Formosa can be cut to other CNC Formosa because the part requiring the most accurate for the CNC move smoothie and without backlash is doing by adjustable eccentric.
If you have something to create, you can adapt your design to each parts does not require accurate more than 0.1mm and you same hight costs of a pro machinist.
2 Commentaires
-
Joseph Wang sur 17th mars 2017 à 9:27
請問最大加工厚度為多少？針對6061鋁合金
-
lossendiere sur 17th mars 2017 à 4:53
I always milling and cut 5083 aluminum https://en.wikipedia.org/wiki/5083_aluminium_alloy
because for create CNC this aluminum is good against vibration.
The deep depend of feedrate ( milling speed ) for example i can in maxi milling 2mm deep with 200mm/min but if you whant go at 250mm/min may be 1.5mm deep 300mm/min 1mm deep
For milling aluminum it’s better have formosa cnc with strong Z axis option like this model
http://www.makerslide-machines.com/2016/11/21/creation-dune-cnc-formosa-1000-avec-axe-z-renforce/For 6061 aluminum i think it’s a little similar than 5083 for deep and speed, the only problem have with aluminum is when aluminum is too soft, the aluminum stick around the tool.
Découpe de l’aluminium
Selon la qualité de l’assemblage de votre machine, vous pourrez obtenir avec une CNC Formosa une précision d’usinage allant de 0,075mm à 0,15mm.
Ceci est largement suffisant pour tous les travaux dans le bois ou les matières plastiques.
Pour les métaux léger comme l’aluminium, bien entendu vous ne pourrez pas atteindre des résolutions de 2/100ème de mm comme pour les CNC professionnelles.
En fait les besoins des makers sont très simples il y a très peu d’ajustement très très précis dans les constructions, par exemple les plaques en aluminium d’une CNC Formosa peuvent être découpées avec une autre CNC Formosa vu que la partie nécessitant le plus de précision est ajustable par excentrique.
Si vous avez des réalisations a faire vous pouvez adapter votre conception pour que chaque parties ne nécessite pas des précisions supérieures à 0,1mm et vous passer ainsi des frais de sous-traitance d’un usineur pro.
2 Commentaires
-
Joseph Wang sur 17th mars 2017 à 9:27
請問最大加工厚度為多少？針對6061鋁合金
-
lossendiere sur 17th mars 2017 à 4:53
I always milling and cut 5083 aluminum https://en.wikipedia.org/wiki/5083_aluminium_alloy
because for create CNC this aluminum is good against vibration.
The deep depend of feedrate ( milling speed ) for example i can in maxi milling 2mm deep with 200mm/min but if you whant go at 250mm/min may be 1.5mm deep 300mm/min 1mm deep
For milling aluminum it’s better have formosa cnc with strong Z axis option like this model
http://www.makerslide-machines.com/2016/11/21/creation-dune-cnc-formosa-1000-avec-axe-z-renforce/For 6061 aluminum i think it’s a little similar than 5083 for deep and speed, the only problem have with aluminum is when aluminum is too soft, the aluminum stick around the tool.
請問最大加工厚度為多少？針對6061鋁合金
I always milling and cut 5083 aluminum https://en.wikipedia.org/wiki/5083_aluminium_alloy
because for create CNC this aluminum is good against vibration.
The deep depend of feedrate ( milling speed ) for example i can in maxi milling 2mm deep with 200mm/min but if you whant go at 250mm/min may be 1.5mm deep 300mm/min 1mm deep
For milling aluminum it’s better have formosa cnc with strong Z axis option like this model
http://www.makerslide-machines.com/2016/11/21/creation-dune-cnc-formosa-1000-avec-axe-z-renforce/
For 6061 aluminum i think it’s a little similar than 5083 for deep and speed, the only problem have with aluminum is when aluminum is too soft, the aluminum stick around the tool.